Anschutz Picatinny Rail (30 MOA) for Model 1761
Item No.016989
Will accommodate picatinny style scope rings for use with scopes, red-dots or many other sighting systems. Designed for model 1761 right hand or left hand ejection. Slides on to the 11 mm rail that is cut into the top of the receiver. The two brass tipped set screws go in the front and middle thread
Suggested Retail Price $96
Price $92
price per Each
excl. tax
3
In stock
Each
Description
Will accommodate picatinny style scope rings for use with scopes, red-dots or many other sighting systems.
Designed for model 1761 right hand or left hand ejection.
Slides on to the 11 mm rail that is cut into the top of the receiver.
The two brass tipped set screws go in the front and middle threaded holes in the rail.
The one without a brass tip belongs in the rear threaded hole in the rail and the round smooth pin end will rest in the recoil slot that is cut perpendicular to the bore in the top of the receiver. Do not over tighten these set screws.
Length: 6.69" (170 mm)
Width: 0.79" (20 mm)
Height: 0.59" (15 mm)
Weight: 2.29 oz (65g)
Material: Aluminum
Designed for model 1761 right hand or left hand ejection.
Slides on to the 11 mm rail that is cut into the top of the receiver.
The two brass tipped set screws go in the front and middle threaded holes in the rail.
The one without a brass tip belongs in the rear threaded hole in the rail and the round smooth pin end will rest in the recoil slot that is cut perpendicular to the bore in the top of the receiver. Do not over tighten these set screws.
Length: 6.69" (170 mm)
Width: 0.79" (20 mm)
Height: 0.59" (15 mm)
Weight: 2.29 oz (65g)
Material: Aluminum
Reviews (0)
There are no reviews yet.
Related Items
Anschutz Picatinny Rail (30 MOA) for Model 1761
Item No.016989
Will accommodate picatinny style scope rings for use with scopes, red-dots or many other sighting systems. Designed for model 1761 right hand or left hand ejection. Slides on to the 11 mm rail that is cut into the top of the receiver. The two brass tipped set screws go in the front and middle thread
Suggested Retail Price $96
Price $92
price per Each
excl. tax
3
In stock
Each
Description
Will accommodate picatinny style scope rings for use with scopes, red-dots or many other sighting systems.
Designed for model 1761 right hand or left hand ejection.
Slides on to the 11 mm rail that is cut into the top of the receiver.
The two brass tipped set screws go in the front and middle threaded holes in the rail.
The one without a brass tip belongs in the rear threaded hole in the rail and the round smooth pin end will rest in the recoil slot that is cut perpendicular to the bore in the top of the receiver. Do not over tighten these set screws.
Length: 6.69" (170 mm)
Width: 0.79" (20 mm)
Height: 0.59" (15 mm)
Weight: 2.29 oz (65g)
Material: Aluminum
Designed for model 1761 right hand or left hand ejection.
Slides on to the 11 mm rail that is cut into the top of the receiver.
The two brass tipped set screws go in the front and middle threaded holes in the rail.
The one without a brass tip belongs in the rear threaded hole in the rail and the round smooth pin end will rest in the recoil slot that is cut perpendicular to the bore in the top of the receiver. Do not over tighten these set screws.
Length: 6.69" (170 mm)
Width: 0.79" (20 mm)
Height: 0.59" (15 mm)
Weight: 2.29 oz (65g)
Material: Aluminum
Reviews (0)
There are no reviews yet.