Knobloch Frames with 37mm Lens Holder, Adjustable Nose Piece, & Carry Case
Item No.K104537
Our top model is a result of over fifty years of development in the fabrication of shooting glasses. Exact fit, the best material and exact detailed workmanship distinguish this top product. The K1 is suitable for all disciplines. It has a height adjustable nose piece (adjustable height from 35 mm t
Price $184
price per Each
excl. tax
33
In stock
Each
Description
Our top model is a result of over fifty years of development in the fabrication of shooting glasses. Exact fit, the best material and exact detailed workmanship distinguish this top product. The K1 is suitable for all disciplines. It has a height adjustable
nose piece (adjustable height from 35 mm to 50 mm), lens holder (37mm) and case are included. Ideal for both rifle and pistol shooting.
Accessories (all sold separately):
1. Lens (Required):
Add a standard non-power or corrective lens for 37mm (#KC) Or take your lens holder to your Optician to get a custom prescription lens cut.
2. Eye Blinder or Second Lens Holder for Non-Aiming Eye (Required):
Eye Blinders for the non-aiming eye. ISSF approved 30mm Wide Blinder in Black (#K2159B), White (#K2160W), or translucent (#K2165T) .
--- Or
There is already a bracket included to add a second lens (#K3366) or a blinder. If you would like to use both a second lens and an eye blinder you will need the Special Slide for attaching a second lens (#K3271)
3. Side Blinders (Optional):
Side Blinders--not ISSF Legal but can be used in non-ISSF competitions - translucent (#K2469) or black (#K2420).
4. Centering Device (Optional):
Centering Device - Used for aligning the center of the lens in shooting position. Removed after alignment is finished during shooting. 37mm (#K2064).
5. Adjustable Iris (Optional):
Adjustable Iris that fits over the lens. 37mm (#K2062).
6. Clip-on Color Filter (Optional):
To use the Clip-on Color Filter you will need the Clip-on Holder, 37mm (#K5010) and the desired colored filter: 37mm Yellow (#K5050Y), 37mm Grey (#K5050G), or 37mm Amethyst (#K5050A).
Additional Accessories are available in 23mm.
Technical Information for your Optician if you are getting a custom prescription lens cut:
The rifle shooter is usually given his distance vision prescription. However, the pistol shooter normally needs an additional +0.25 or +0.5 dpt., so that both front and rear sights are seen clearly. The pistol shooter can tolerate a small amount of blurring of the target.
Accessories (all sold separately):
1. Lens (Required):
Add a standard non-power or corrective lens for 37mm (#KC) Or take your lens holder to your Optician to get a custom prescription lens cut.
2. Eye Blinder or Second Lens Holder for Non-Aiming Eye (Required):
Eye Blinders for the non-aiming eye. ISSF approved 30mm Wide Blinder in Black (#K2159B), White (#K2160W), or translucent (#K2165T) .
--- Or
There is already a bracket included to add a second lens (#K3366) or a blinder. If you would like to use both a second lens and an eye blinder you will need the Special Slide for attaching a second lens (#K3271)
3. Side Blinders (Optional):
Side Blinders--not ISSF Legal but can be used in non-ISSF competitions - translucent (#K2469) or black (#K2420).
4. Centering Device (Optional):
Centering Device - Used for aligning the center of the lens in shooting position. Removed after alignment is finished during shooting. 37mm (#K2064).
5. Adjustable Iris (Optional):
Adjustable Iris that fits over the lens. 37mm (#K2062).
6. Clip-on Color Filter (Optional):
To use the Clip-on Color Filter you will need the Clip-on Holder, 37mm (#K5010) and the desired colored filter: 37mm Yellow (#K5050Y), 37mm Grey (#K5050G), or 37mm Amethyst (#K5050A).
Additional Accessories are available in 23mm.
Technical Information for your Optician if you are getting a custom prescription lens cut:
The rifle shooter is usually given his distance vision prescription. However, the pistol shooter normally needs an additional +0.25 or +0.5 dpt., so that both front and rear sights are seen clearly. The pistol shooter can tolerate a small amount of blurring of the target.
Reviews (0)
There are no reviews yet.
Knobloch Frames with 37mm Lens Holder, Adjustable Nose Piece, & Carry Case
Item No.K104537
Our top model is a result of over fifty years of development in the fabrication of shooting glasses. Exact fit, the best material and exact detailed workmanship distinguish this top product. The K1 is suitable for all disciplines. It has a height adjustable nose piece (adjustable height from 35 mm t
Price $184
price per Each
excl. tax
33
In stock
Each
Description
Our top model is a result of over fifty years of development in the fabrication of shooting glasses. Exact fit, the best material and exact detailed workmanship distinguish this top product. The K1 is suitable for all disciplines. It has a height adjustable
nose piece (adjustable height from 35 mm to 50 mm), lens holder (37mm) and case are included. Ideal for both rifle and pistol shooting.
Accessories (all sold separately):
1. Lens (Required):
Add a standard non-power or corrective lens for 37mm (#KC) Or take your lens holder to your Optician to get a custom prescription lens cut.
2. Eye Blinder or Second Lens Holder for Non-Aiming Eye (Required):
Eye Blinders for the non-aiming eye. ISSF approved 30mm Wide Blinder in Black (#K2159B), White (#K2160W), or translucent (#K2165T) .
--- Or
There is already a bracket included to add a second lens (#K3366) or a blinder. If you would like to use both a second lens and an eye blinder you will need the Special Slide for attaching a second lens (#K3271)
3. Side Blinders (Optional):
Side Blinders--not ISSF Legal but can be used in non-ISSF competitions - translucent (#K2469) or black (#K2420).
4. Centering Device (Optional):
Centering Device - Used for aligning the center of the lens in shooting position. Removed after alignment is finished during shooting. 37mm (#K2064).
5. Adjustable Iris (Optional):
Adjustable Iris that fits over the lens. 37mm (#K2062).
6. Clip-on Color Filter (Optional):
To use the Clip-on Color Filter you will need the Clip-on Holder, 37mm (#K5010) and the desired colored filter: 37mm Yellow (#K5050Y), 37mm Grey (#K5050G), or 37mm Amethyst (#K5050A).
Additional Accessories are available in 23mm.
Technical Information for your Optician if you are getting a custom prescription lens cut:
The rifle shooter is usually given his distance vision prescription. However, the pistol shooter normally needs an additional +0.25 or +0.5 dpt., so that both front and rear sights are seen clearly. The pistol shooter can tolerate a small amount of blurring of the target.
Accessories (all sold separately):
1. Lens (Required):
Add a standard non-power or corrective lens for 37mm (#KC) Or take your lens holder to your Optician to get a custom prescription lens cut.
2. Eye Blinder or Second Lens Holder for Non-Aiming Eye (Required):
Eye Blinders for the non-aiming eye. ISSF approved 30mm Wide Blinder in Black (#K2159B), White (#K2160W), or translucent (#K2165T) .
--- Or
There is already a bracket included to add a second lens (#K3366) or a blinder. If you would like to use both a second lens and an eye blinder you will need the Special Slide for attaching a second lens (#K3271)
3. Side Blinders (Optional):
Side Blinders--not ISSF Legal but can be used in non-ISSF competitions - translucent (#K2469) or black (#K2420).
4. Centering Device (Optional):
Centering Device - Used for aligning the center of the lens in shooting position. Removed after alignment is finished during shooting. 37mm (#K2064).
5. Adjustable Iris (Optional):
Adjustable Iris that fits over the lens. 37mm (#K2062).
6. Clip-on Color Filter (Optional):
To use the Clip-on Color Filter you will need the Clip-on Holder, 37mm (#K5010) and the desired colored filter: 37mm Yellow (#K5050Y), 37mm Grey (#K5050G), or 37mm Amethyst (#K5050A).
Additional Accessories are available in 23mm.
Technical Information for your Optician if you are getting a custom prescription lens cut:
The rifle shooter is usually given his distance vision prescription. However, the pistol shooter normally needs an additional +0.25 or +0.5 dpt., so that both front and rear sights are seen clearly. The pistol shooter can tolerate a small amount of blurring of the target.
Reviews (0)
There are no reviews yet.