K2 Model Offset Frames with fixed slanted nose piece. The K2 model is ideally suitable for rifle shooters with an extreme firing position. The shifted attached nose piece makes it possible to aim with a slant over the nose without blocking the sight line. Right aiming eye only.

Product includes:

• 23mm lens holder
• Vario-Stick 
• extra lens holding bracket
• screwdriver
• hard case

Accessories (all sold separately):

1. Lens (Required):


Add a standard non-power or corrective lens for 23mm (#K23)    Or take your lens holder to your Optician to get a custom prescription lens cut.

2. Eye Blinder or Second Lens Holder for Non-Aiming Eye (Required):

Eye Blinders for the non-aiming eye.  ISSF approved 30mm Wide Blinder in Black (#K2159B), White (#K2160W), or translucent (#K2165T) .    
---  Or  
There is already a bracket included to add a second lens 37 mm (#K3366) or 23mm (# K3266) or a blinder.  If you would like to use both a second lens and an eye blinder you will need the Special Slide for attaching a second lens (#K3271)


3. Side Blinders (Optional):

Side Blinders--not ISSF Legal but can be used in non-ISSF competitions - translucent (#K2469) or black (# K2420).  

4. Centering Device (Optional):

Centering Device - Used for aligning the center of the lens in shooting position.  Removed after alignment is finished during shooting. 23mm (#K2164).    
   

5. Clip-on Color Filter (Optional):

To use the Clip-on Color Filter you will need the Clip-on Holder, 23mm (#K5011) and the desired  colored filter: 23mm Yellow (#K5051Y), 23mm Grey (#K5051G),   or 23mm Amethyst (#K5051A).  
 
Technical Information for your Optician if you are getting a custom prescription lens cut:
The rifle shooter is usually given his distance vision prescription. However, the pistol shooter normally needs an additional +0.25 or +0.5 dpt., so that both front and rear sights are seen clearly. The pistol shooter can tolerate a small amount of blurring of the target.